Europe ended 2025 with more than 100 GW of energy storage, split almost evenly between pumped hydro at around 52 GW and batteries at 50 GW. Around 86 GW of that is in the EU-27. Reaching the European Commission’s 200 GW target for 2030 therefore means more than doubling the EU’s stock in five years, and SolarPower Europe expects batteries, the fastest-growing technology, to carry most of this load. The EU already had 40 GW of batteries in operation by the end of 2025, from a very low base only three years earlier.
Why batteries carry the weight
There are clear reasons for the paper’s focus on batteries. The International Energy Agency, which SolarPower Europe cites, says they help integrate growing shares of wind and solar by responding quickly to changes in supply and demand. They provide balancing and ancillary services, and support grid stability through grid-forming, black start and fast frequency response. According to the IEA, batteries can also delay the need for network upgrades and make room for new loads from electric vehicles, heat pumps and data centres.
S&P Global: batteries beat gas and diesel on data centre costs
The same qualities that make batteries useful, however, make them awkward to fit into electricity markets designed around conventional generation. “Battery storage systems still face restrictive market participation rules, fragmented national frameworks and insufficient revenue visibility,” the paper notes. That matters all the more as negative prices and curtailment become more frequent across European power markets.
Unlocking investment: what already works
SolarPower Europe backs its case with examples from Member States where targeted support has already brought in investment. Between them, Bulgaria, Italy and Spain have enabled around 33.1 GWh of utility-scale battery energy storage systems (BESS). Bulgaria alone has provided grants of around €300 million for standalone BESS and another €300 million for BESS co-located with PV, with the aim of hybridising solar plants. According to the paper, these measures unlocked €1.5 billion of private investment in 14 GWh of standalone BESS projects and more than €600 million in almost 0.6 GW of co-located PV and storage projects.
For their part, Italy and Spain have taken different routes to the same end. Italy is introducing MACSE, a centralised capacity auction that offers long-term availability contracts and stable revenue for storage assets, while Spain is using competitive investment grants from the European Regional Development Fund (ERDF) for both standalone and hybrid storage projects. The association argues that other countries should follow these models, backed by EU-level instruments that provide long-term revenue stability and reduce the risk of utility-scale investment.
The double-charging problem
One of the most concrete regulatory barriers is also one of the most mundane. “Because batteries both withdraw and inject electricity, network charges are often applied twice to the same unit of electricity, increasing operational costs, weakening business cases and reducing the ability of storage to provide flexibility, congestion management and other system services,” the paper states. So far, only eight Member States have introduced full or partial exemptions from these charges for BESS: Belgium, Germany, Greece, Ireland, Italy, the Netherlands, Portugal and Spain. Ireland’s full reform took effect in October 2026. Poland and Lithuania, for their part, have taken other approaches that effectively reduce or eliminate double charging.
Europe – a 500-site plan to bring batteries to business
France offers an early glimpse of what a more sophisticated approach might look like. TURPE 7, the country’s new grid tariff framework, introduced an optional locational tariff in August 2026 that rewards batteries for providing flexibility where the grid is under stress. Batteries connected at designated nodes can pay lower or even negative grid charges when they operate in a way that supports the grid. The paper estimates that the scheme could bring an additional €8,000–12,000/MW a year for a two-hour battery operating daily during the summer injection window, and up to €2,000–4,000/MW a year in winter consumption zones at distribution level.
Flexible connections and the Dutch experiment
Grid access, according to the paper, remains the hardest constraint on deployment. SolarPower Europe argues that properly designed flexible connection agreements, which let projects connect before the grid has been fully reinforced, can bring new capacity online while the upgrades are built. It also warns, however, that “poor design, different rules from operator to operator and uneven implementation of the EMD at national level can create investor uncertainty, while over-reliance on these contracts can instead constrain storage operation or shift excessive risk from network operators to developers.”
The Netherlands has become the first place to test this at scale. Battery projects there can obtain grid access through a combination of a time-bound transmission right and a capacity control contract, which let them connect more quickly in congested areas in exchange for accepting operating limits during predefined congestion periods. The first large-scale user is the Sequoia BESS (200 MW/800 MWh), which the paper presents as proof that storage can help relieve congestion across the wider network.
The supply-chain gap
The paper’s figures on supply are less encouraging. Around 92 percent of the lithium-ion battery cells used in Europe today come from elsewhere, and SolarPower Europe cautions that nominal manufacturing capacity does not necessarily translate into actual output, given commissioning timelines, utilisation rates and project delays.
Opinion: Europe needs battery suppliers who stay after the sale
European industrial policy on batteries has so far been built around the electric-vehicle market. The EU Battery Booster Facility will mobilise up to €1.5 billion from the Innovation Fund, which is financed through revenues from the EU Emissions Trading System (ETS). It offers interest-free loans to eligible battery cell manufacturing projects, up to €500 million per project and covering up to 60 percent of eligible costs. As the paper notes, however, the Commission has made clear that the instrument targets cell producers in the ramp-up phase, with a focus on cells for electric vehicles made in the European Economic Area (EEA). Stationary storage is therefore largely outside its scope.
In response, SolarPower Europe calls for a dedicated line of support that goes beyond loans, including “tailor-made OPEX support provided directly to cover operating costs during the ramp-up phase.” That support should cover battery management systems, power conversion systems and control software as well as cells. At the same time, the association warns against moving too quickly to local-content rules, arguing that any supply restrictions must be matched by sufficient European manufacturing capacity, or project costs will rise.
A narrow window
Taken together, the paper sets out a clear timetable. It calls on Member States to set indicative non-fossil flexibility objectives by January 2027, and to remove restrictive market-participation rules without further delay, by the end of 2027 at the latest. By the same date, hybrid solar-plus-storage projects should be treated on equal terms with standalone assets. The Commission, for its part, is asked to monitor implementation, harmonise grid-forming requirements and prevent the internal market from fragmenting into incompatible national regimes.
Europe’s clean power passes a stress test, but flexibility gap widens
Whether Europe will double its storage fleet by 2030 remains an open question. The technology is ready, and the Bulgarian, Italian and Spanish examples show that private capital will move when market signals are clear. According to the paper, the missing piece is a regulatory framework that can turn a political target into 100 GW of new capacity on the ground. (hcn)