200 percent better light adsorption for solar cells

12/5/17, 2:01 PM -

Researchers have succeeded to transfer nanostructures of black butterfly wings to thin-film solar cells. Thus the light absorption rate can be enhanced by up to 200 percent.

Nanostructures of the wing of Pachliopta aristolochiae can be transferred to solar  cells and enhance their absorption rates by up to 200 percent.
Nanostructures of the wing of Pachliopta aristolochiae can be transferred to solar cells and enhance their absorption rates by up to 200 percent.

Sunlight reflected by solar cells is lost as unused energy. The wings of the butterfly Pachliopta aristolochiae are drilled by nanostructures (nanoholes) that help absorbing light over a wide spectrum far better than smooth surfaces. Researchers of Karlsruhe Institute of Technology (KIT) have now succeeded in transferring these nanostructures to solar cells and, thus, en- hancing their light absorption rate by up to 200 percent.

Perfect absorbtion for optimum heat management

“The butterfly studied by us is very dark black. This signifies that it perfectly absorbs sunlight for optimum heat management. Even more fascinating than its appearance are the mechanisms that help reaching the high absorption. The optimization potential when transferring these structures to photovoltaics (PV) systems was found to be much higher than expected,” says Dr. Hendrik Hölscher of KIT’s Institute of Microstructure Technology (IMT).

Cross-connections between the ridges on the butterfly wing of Pachliopta aristolochi- ae form disordered “nanoholes” that enhance light absorption

Interesting for European conditions

The scientists of the team of Hendrik Hölscher and Radwanul H. Siddique (formerly KIT, now Caltech) reproduced the butterfly’s nanostructures in the silicon absorbing layer of a thin-film solar cell. Subsequent analysis of light absorption yielded promising results: Compared to a smooth surface, the absorption rate of perpendicular incident light increases by 97% and rises continuously until it reaches 207% at an angle of incidence of 50 degrees. “This is particularly interesting under European conditions. Frequently, we have diffuse light that hardly falls on solar cells at a vertical angle,” Hendrik Hölscher says.

However, this does not automatically imply that efficiency of the complete PV system is enhanced by the same factor, says Guillaume Gomard of IMT. “Also other components play a role. Hence, the 200 percent are to be considered a theoretical limit for efficiency enhancement.”

Computer simulation helped

Prior to transferring the nanostructures to solar cells, the researchers determined the diameter and arrangement of the nanoholes on the wing of the butterfly by means of scanning electron microscopy. Then, they analyzed the rates of light absorption for various hole patterns in a computer simulation. They found that disordered holes of varying diameters, such as those found in the black butterfly, produced most stable absorption rates over the complete spectrum at variable angles of incidence, with respect to periodically arranged monosized nanoholes. Hence, the researchers introduced disorderly positioned holes in a thin-film PV absorber, with diameters varying from 133 to 343 nanometers.

The scientists demonstrated that light yield can be enhanced considerably by removing material. In the project, they worked with hydrogenated amorphous silicon. According to the researchers, however, any type of thin-film PV technology can be improved with such nanostructures, also on the industrial scale.(HCN)

Read more about solar modules

Stay informed, get our free newsletter twice a week. Register here.

More useful information:

http://www.pveurope.eu/News/Solar-Generator/Record-solar-cell-with-35.9-percent-efficiency

http://www.pveurope.eu/News/Solar-Generator/31.3-percent-efficiency-for-silicon-based-multi-junction-solar-cell

http://www.pveurope.eu/News/Solar-Generator/Race-for-the-most-efficient-monocrystalline-solar-cells